Hangzhou Delixi Group Co.,Ltd.

86 - 571 - 85221566

info@hz-delixi.com

Login/Register

Language (English)

Featured News

Frequency inverter characteristics for pump motor control

Electric motor restart

Some pumps require high efficiency operation, which usually need power frequency supply and variable frequency power supply switching at any time. For example, a residential area using deep geothermal water for heating, with three motors - water pump heating is controlled by a frequency inverter, the maximum frequency is 50Hz, the largest water supply volume is two motor units operation in power frequency supply. According to diurnal temperature changes with different demands for heating, the system's two motor units can be: one motor running in power frequency, the other one running in variable frequency (50Hz less) power; one motor outage, the other one running in variable frequency power. The third motor is controlled by soft starter to make mutual backup with other two motors. Therefore, such operation methods not only meet the heating requirements, improve operational efficiency, but also save lots of electricity energies. However, in those operation methods, it requires the frequency inverter has speed tracking feature, particularly from the commercial power supply switches to variable frequency operation. Thus, the motor has a smooth switching when power supply cut off, from idle to restart, thereby enhance the system reliability and stability in continuous operation.

Self-diagnosis of continuous operation

Due to power disturbances, the pumps often tripped and the reasons are difficult to find out. When an abnormal condition occurs, the frequency inverter can perform self-diagnosis first, if the system has no problem it will reset and restart automatically, and find out the electric motor deceleration reasons in self-diagnosis by speed detection function during this period, and make it reaches the original speed, which requires the system should be integrated abnormal shutdown recovery function.

Free tripping operation function

Pump driving has torque decreased characteristic, effective overload protection function is important to make it running on the over-torque conditions. In this case, once the overload current reaches the set value, reduce the frequency inverter output frequency, that is stall in running. For such torque decreased loads, the frequency inverter can be running at the balance point for a short time, and restore original set frequency automatically after the load drops.

This article comes from frequency-inverters edit released

Form Blogs

The IoE Ushers in Opportunity for The Last Product Recall

In our consumer-centric society, product recall announcements grab headlines and...

Contact Us

Still Not Finding What You're Looking For?

Call 86-571-87761308-BUY-DELIXI

Consumer Services

M-F 8am to 7pm EST | Sat 9am to 3pm EST
Closed on All Nationally Observed Holidays